Slider

Better Products Through Better Chemistry

BOND COAT

BOND COAT

BOND COAT is a thin cementicious overlay applied as a base coat for spray deck, stamp mix, trowel down, vertical stamp mix or other similar finishes.

  • High bond strength.
  • Improved resistance to weather and freeze thaw cycles.
  • Can be integrally colored with EZCHEM EZ COLOR PAKS
  • Can be colored/stained topically with EZCHEM ENVIRO STAINS or EARTHTONE CONCRETE STAINS.
BROOM FINISH MIX

BROOM FINISH MIX

BROOM FINISH MIX is a single component overlay system that bonds to all clean concrete surfaces to produce a rock hard, weather proof surface. It can be troweled or squeegee applied as a thin bond coat, or applied by hopper spray gun for a textured surface.

  • High bond, flexural and compressive strength. Consistant and evenly textured finish.
  • Can be integrally colored with EZCHEM EZ COLOR PAKS.
  • Can be stained with EZCHEM ENVIRO STAIN or EARTHTONE STAIN for a wide array of decorative finishes.
  • Can be sealed with EZCHEM CLEAR ACRYLIC SEALER or COLORED ACRYLIC SEALER for a consistently colored and durable surface.
CARVING & MOLDING MIX

CARVING & MOLDING MIX

CARVING & MOLDING MIX is a special cementitious blend of aggregate and fibers to create a rock hard, weatherproof coating, and molding product that receives texture and detail immediately.

  • One component mix.
  • No extra additives.
  • Replicates stamps and molds with well defined image.
  • Rock hard surface that resists water penetration for long lasting beauty.
  • Stains fast and easy. Although the surface is rock hard it will take acid, water, and color dye stains with ease.
COUNTERTOP MIX

COUNTERTOP MIX

COUNTERTOP MIX is a special cementitious blend of aggregate and graded sands, plus performance enhancing additives that can be used for the cast in place or the pre-casting method of forming counter top or other decorative and useful surfaces.

  • Easy to use and very durable. COUNTERTOP MIX can be polished, stamped or stained to produce a variety of decorative surfaces.
  • COUNTERTOP MIX can be cast in place or pre-cast and installed to accommodate various circumstances.
  • Various decorative surfaces. COUNTERTOP MIX will accept all sorts of surface embedments including glass beads, decorative stones and metals to produce striking effects.
  • Ultra strong. COUNTERTOP MIX produces a very strong casting that will bridge long spaces and support hundreds of pounds of weight, and it lasts for years outside or inside.
MICRO TOPPING

MICRO TOPPING

MICRO TOPPING is a cement based, polymer modified decorative concrete topping material. This single component micro topping is a thinly applied topping that closely resembles the look of natural concrete.

  • High bond, flexural and compressive strength. Consistant and evenly textured finish.
  • Can be integrally colored with EZCHEM EZ COLOR PAKS.
  • Can be stained with EZCHEM ENVIRO STAIN or EARTHTONE STAIN for a wide array of decorative finishes.
  • Can be sealed with EZCHEM CLEAR ACRYLIC SEALER or COLORED ACRYLIC SEALER for a consistently colored and durable surface.
RE-COAT

RE-COAT

RE-COAT is a single component, high performance, polymer modified topping mix designed to resurface almost any concrete surface. RE-COAT can be used on horizontal or vertical surfaces and can be pigmented which eliminates the need for painting. RE-COAT can protect, restore and color most concrete, asphalt and wood surfaces without changing the appearance or texture.

  • Superior Adhesion, Scratch resistant, Weather resistant
  • Can be stained with EZCHEM ENVIRO STAIN or EARTHTONE STAIN for a wide array of decorative finishes.
  • Can be sealed with EZCHEM CLEAR ACRYLIC SEALER or COLORED ACRYLIC SEALER for a consistently colored and durable surface.
SPRAY MIX

SPRAY MIX

SPRAY MIX is a single component overlay system that bonds to all clean concrete surfaces to produce a rock hard weather proof surface. It can be troweled or squeegee applied as a thin bond coat or applied by hopper spray gun for a textured surface.

  • High bond, flexural and compressive strength. Consistant and evenly textured finish.
  • Can be integrally colored with EZCHEM EZ COLOR PAKS.
  • Can be stained with EZCHEM ENVIRO STAIN or EARTHTONE STAIN for a wide array of decorative finishes.
  • Can be sealed with EZCHEM CLEAR ACRYLIC SEALER or COLORED ACRYLIC SEALER for a consistantly colored and durable surface.
Stamp Mix

STAMP MIX

STAMP MIX is a ready to use, one component overlay system that bonds to all clean concrete surfaces to produce a rock hard, weather proof surface. It can be troweled or stamped, stained and sealed for a beautiful, long life floor.

  • One component mix: No extra additives. Just add water, mix and apply. Saves time and money.
  • Replicates stamps with a sharp well defined image that is superior to all other stamp mixes.
  • Rock hard surface: Stamp Mix sets to a superior, rock hard surface that resists water penetration and re-wetting. This means beauty that lasts.
  • Stains fast and easy: Although the surface is rock hard, it will take acid stains or water based stains with equal ease. Properly sealed this is a low maintenance surface that is easy to keep clean.
STONE TOP COUNTERTOP MIX

STONE TOP COUNTERTOP MIX

STONE TOP COUNTERTOP MIX is a superior grade mix that bonds great to formica, marble, cultured marble, granite, mdf, mdx, and other substrate materials.

  • High bond, flexural and compressive strength. Consistant and evenly textured finish.
  • Can be integrally colored with EZCHEM EZ COLOR PAKS.
  • Can be stained with EZCHEM ENVIRO STAIN OR EARTHTONE STAIN for a wide array of decorative finishes.
  • Can be sealed with EZCHEM CLEAR ACRYLIC SEALER or COLORED ACRYLIC SEALER for a consistantly colored and durable surface.
TEXTURE BLEND

TEXTURE BLEND

TEXTURE BLEND is a single component concrete flooring overlay designed to create a textured canvas.

  • Easy to create a variety of textures.
  • Using EZCHEM EZ COLOR PAKS can provide a myriad of base colors and is recommended when trying to achieve darker colored results.
VERTICAL SCULPT MIX

VERTICAL SCULPT MIX

VERTICAL SCULPT MIX provides an authentic look and feel of brick, stone, and slate to any stable interior or exterior surface. It is designed for exceptional adherence and manipulation to any vertical surface.

  • One component mix. No extra additives. Just add water, mix and apply. Saves time and money.
  • VERTICAL SCULPT MIX provides for a better overall performance than most resins, modifiers, and polymers.
  • VERTICAL SCULPT MIX creates an authentic look of real brick, stone, and slate at a fraction of the cost.
  • Easily colored and manipulated to match any surroundings and landscape.
VERTICAL STAMP MIX

VERTICAL STAMP MIX

VERTICAL STAMP MIX is a ready to use, one component overlay system that bonds to all clean concrete surfaces to produce a rock hard weather proof surface. It can be troweled or stamped and sealed for a beautiful, long life floor.

  • One component mix. No extra additives. Just add water, mix and apply. Saves time and money.
  • Resurfaces old and worn concrete, restoring a like new appearance that lasts for years.
  • Rock hard surface: VERTICAL STAMP MIX sets to a superior, rock hard surface that resists water penetration and re-wetting. This means beauty that lasts.
  • Stains fast and easy: Although the surface is rock hard, it will take acid stains or water based stains with equal ease.