Slider

Better Products Through Better Chemistry

AQUA CLEAR COAT

AQUA CLEAR COAT

AQUA CLEAR COAT is a unique new water based acrylic coating. It will enhance the color and brilliance of an acid stained concrete floor equal to the typical solvent based sealer, without the smell or hazard.

  • No Hazardous Fumes: AQUA CLEAR COAT does not emit flammable or toxic fumes, and can be used where normal ventilation is available.
  • Nonflammable: AQUA CLEAR COAT itself is not flammable or combustible. The risk of fire is essentially eliminated.
  • Low Toxicity: Once dry and cured overnight, AQUA CLEAR COAT is non-toxic, colorless and odorless.
CLEAR COAT GLOSS

CLEAR COAT GLOSS

CLEAR COAT GLOSS is a 25% sealer that forms a tough crystal clear coating that seals, beautifies, and protects all concrete surfaces interior or exterior. CLEAR COAT GLOSS finish is a premium pure acrylic sealer for decorative concrete. It never yellows.

  • Clear and Colorless: CLEAR COAT goes on water white and never yellows.
  • Environmental: CLEAR COAT contains no chlorinated solvents or other ozone depleting solvents.
  • Dries to a smooth, tough, glossy finish: CLEAR COAT flows and levels to prevent brush strokes or roller marks, and dries smooth and glossy.
  • Dries quickly: The active solvent system in CLEAR COAT evaporates quickly and completely leaving only the acrylic polymer. Once dry, all flammable solvent is gone and the area is safe and ready to use.
CLEAR COAT HIGH GLOSS

CLEAR COAT HIGH GLOSS

CLEAR COAT HIGH GLOSS is a 30% sealer that forms a tough crystal clear coating that seals, beautifies, and protects all concrete surfaces interior or exterior. CLEAR COAT HIGH GLOSS finish is a high performance acrylic sealer for stamped concrete. It never yellows.

  • Clear and Colorless: CLEAR COAT HG goes on water white and never yellows.
  • Environmental: CLEAR COAT HG contains no chlorinated solvents or other ozone depleting solvents.
  • Dries to a smooth, tough, glossy finish: CLEAR COAT HG flows and levels to prevent brush strokes or roller marks, and dries smooth and glossy.
  • Dries quickly: The active solvent system in CLEAR COAT HG evaporates quickly and completely leaving only the acrylic polymer. Once dry, all flammable solvent is gone and the area is safe and ready to use.
CLEAR COAT SATIN

CLEAR COAT SATIN

CLEAR COAT SATIN is a 20% sealer that forms a tough crystal clear coating that seals, beautifies, and protects all concrete surfaces interior or exterior. CLEAR COAT SATIN finish is ideal for sidewalks, patios and pool decks. CLEAR COAT SATIN is a pure acrylic sealer that never yellows.

  • Clear and Colorless: CLEAR COAT SATIN goes on water white and never yellows.
  • Environmental: CLEAR COAT SATIN contains no chlorinated solvents or other ozone depleting solvents.
  • Dries to a smooth, tough, glossy finish: CLEAR COAT SATIN flows and levels to prevent brush strokes or roller marks, and dries smooth and glossy.
  • Dries quickly: The active solvent system in CLEAR COAT SATIN evaporates quickly and completely leaving only the acrylic polymer. Once dry, all flammable solvent is gone and the area is safe and ready to use.
CLEAR COAT VOC

CLEAR COAT VOC

CLEAR COAT VOC is a 25% solvent based, pure acrylic coating that forms a tough crystal clear coating that seals, beautifies, and protects all concrete surfaces. It is colorless, and never yellows.

  • Clear and Colorless: CLEAR COAT VOC goes on water white and never yellows.
  • Environmental: CLEAR COAT VOC contains no chlorinated solvents or other ozone depleting solvents, and it is VOC compliant in NJ, NY and other Northeast US states.
  • Dries to a smooth, tough, glossy finish: CLEAR COAT VOC flows and levels to prevent brush strokes or roller marks, and dries smooth and glossy.
  • Dries quickly: The active solvent system in CLEAR COAT VOC evaporates quickly and completely leaving only the acrylic polymer. Once dry, all flammable solvent is gone and the area is safe and ready to use.
CURE AND SEAL

CURE AND SEAL

CURE AND SEAL is a fast drying acrylic resin used on freshly poured concrete. CURE AND SEAL forms a thin membrane to hold moisture in and help slow the curing process.

  • Controls moisture loss: Rapid loss of moisture in the surface of freshly laid concrete prevents proper curing and leads to weak flaking surface. CURE AND SEAL seals and prevents rapid moisture loss thus producing stronger, harder concrete.
  • Reduces dusting: The CURE AND SEAL film binds to the dry surface of the concrete and reduces incidental dusting.
  • Helps prevent staining: The sealed surface prevents water based stains from penetrating the surface and reduces clean up problems.
  • Prevents checkering: By controlling the moisture loss, rapid cure is prevented. Rapid cure leads to surface stress and this leads to spider web cracking. CURE AND SEAL protects against these problems.
CURE AND SEAL VOC

CURE AND SEAL VOC

CURE AND SEAL VOC is a fast drying acrylic resin used on freshly poured concrete. CURE AND SEAL VOC forms a thin membrane to hold moisture in and help slow the curing process.

  • Controls moisture loss: Rapid loss of moisture in the surface of freshly laid concrete prevents proper curing and leads to weak flaking surface. CURE AND SEAL VOC seals and prevents rapid moisture loss thus producing stronger, harder concrete.
  • Reduces dusting: The CURE AND SEAL VOC film binds to the dry surface of the concrete and reduces incidental dusting.
  • Helps prevent staining: The sealed surface prevents water based stains from penetrating the surface and reduces clean up problems.
  • Prevents checkering: By controlling the moisture loss, rapid cure is prevented. Rapid cure leads to surface stress and this leads to spider web cracking. CURE AND SEAL VOC protects against these problems.
ENVIRO WB SEALER

ENVIRO WB SEALER

ENVIRO WB SEALER is a tough, non-yellowing acrylic sealer for interior and exterior use, to seal and protect surfaces decorated with ENVIRO WB STAIN.

  • Non-flammable: ENVIRO WB SEALER has no flammable hazard when used indoors or out.
  • No hazardous fumes or odors: It is not necessary to wear a protective breathing apparatus, and normal ventilation is adequate.
  • Fast Drying: ENVIRO WB SEALER dries to the touch in 30 to 45 minutes, and can be recoated in one hour normally. Two coats are recommended, but the floor can be walked on the same day, usually after 12 hours.
  • Non-slip and water resistant: The coating is not glossy, and does not present a hazardous walking surface wet or dry.
EZ SHIELD

EZ SHIELD

EZ-SHIELD is a colorless non-flammable surface treatment that produces an invisible protective coating on stone, concrete, and brick. The coating is water repellent that resists soils, stains, and biological growth. It is also vapor permeable, so cracking, spalling and freeze/thaw damage is reduced.

  • Non-flammable: Unlike solvent based coatings, EZSHIELD is safe to use anywhere. Total hydrophobic shield.
  • Colorless: The all but invisible film on the surface of stone or concrete, etc. does not change the surface appearance or leave a glossy finish.
  • Breathable: Water does not penetrate the barrier, but moisture vapor does. Therefore, moisture trapped behind a layer can exit and not cause cracking, spalling efflorescence or freeze/thaw damage.
  • Makes clean up easier: The sealed water repellant surface resists staining and atmospheric contamination, and it resists the growth of biological contaminants such as mold and mildew. When stains and deposits do not stick, clean up is easier.
  • Environmentally friendly: With no toxic solvents or additives and NO VOC content, EZ SHIELD causes no pollution.
EZ SHIELD PLUS

EZ SHIELD PLUS

EZ-SHIELD PLUS is a non-flammable surface treatment that produces an invisible protective coating on Stone, Concrete, and Brick. The coating is water repellent that resists soils, stains, and biological growth. It is also vapor permeable so cracking, spalling and freeze/thaw damage is reduced.

  • Non-flammable: Unlike solvent based coatings, EZSHIELD PLUS is safe to use anywhere. Total hydrophobic shield.
  • Colorless: The all but invisible film on the surface of stone or concrete, etc. does not change the surface appearance or leave a glossy finish.
  • Breathable: Water does not penetrate the barrier, but moisture vapor does. Therefore, moisture trapped behind a layer can exit and not cause cracking, spalling efflorescence or freeze/thaw damage.
  • Makes clean up easier: The sealed water repellant surface resists staining and atmospheric contamination, and it resists the growth of biological contaminants such as mold and mildew. When stains and deposits do not stick, clean up is easier.
  • Environmentally friendly: With no toxic solvents or additives and NO VOC content, EZ SHIELD PLUS causes no pollution.
SUPER DECORATIVE SEALER

SUPER DECORATIVE SEALER

SUPER DECORATIVE SEALER is a non-yellowing, high gloss, siloxane modified methyl methacrylate with excellent adhesion to properly prepared concrete substrates. Superior resistance compared to standard sealers used to protect exterior concrete.

  • Minimizes damage due to water and salt water from de-icing road salts.
  • Excellent penetration and adhesion to clean, unsealed new or old concrete
  • Non-yellowing
  • Can be applied as a reseal on certain solvent based acrylic sealers
  • VOC compliant for most areas in the United States and Canada